Extreme Carpenter Skills

This carpenter is certainly skilled in new home construction utilizing only the minimal tools required. Do Not try this at home as this builder is a professional!

15 comments to Extreme Carpenter Skills

perv

January 12th, 2010 at 8:23 AM · Reply

B-U-L-L-S-H-I-T-!
KiwiBuilder

January 13th, 2010 at 6:09 PM · Reply

Nice wish it could work for real
josh

January 17th, 2010 at 9:19 PM · Reply

In the slim chance that this is real, it would require too much force for any Yuppie…but seeing how he’s a carpenter, he could pull it off.
Andrew

January 19th, 2010 at 5:27 AM · Reply

I saw it but i wooden believe it
otis t.

January 20th, 2010 at 4:37 PM · Reply

I know a guy who does this with buzz saw blades and logs. (buzz saw blades are like 30 inches across. He also eats skunks and uses their tails for napkins.
- BigGeekDad
  
  January 20th, 2010 at 6:02 PM · Reply
  
  Does this guy also have a Blue Ox?
otis t.

January 20th, 2010 at 8:57 PM · Reply

the board was already cut part way through, you will notice that when the guy puts the mark on it, he is covering the cut up with his square, back it up slow and look at it. All the guy had to do was hit it with the blade to break it off. Physics will tell you that it is physically impossible to get enough spin and torque on that blade in that short of a distance to make a clean cut like that through the board. It is a fake…laws of physics.
Joanne Cobbs

January 21st, 2010 at 11:45 AM · Reply

Of course he set it up to be precut but it was still pretty amazing how he zoned in on the precut to finish the job. Incredible aim.
ExpatAl

January 21st, 2010 at 3:22 PM · Reply

Trick it may be, but an impressive trick eh?
Jim C.

February 3rd, 2010 at 6:30 PM · Reply

Anyone notice the sparks? Saw blades don’t spark on wood unless they hit a nail. Sparks must have been something else. Hmmmm?
CJ

February 4th, 2010 at 5:17 AM · Reply

Real or not, doesn’t matter. Still, if true, think of the electrical costs it would save.